Guide

How much working capital can a contractor get?

The amount follows the file, not the contract: monthly deposits, how the balance holds between draws, and what already comes out each week. Size the gap to the first draw first, then pick the structure.

How much working capital a contractor can get depends on the file, not the size of the contract. The review desk reads the deposits that actually reached the business account over several months, how the balance holds between draws, and what already comes out each week. At Aglet Funding, working-capital programs typically range up to 2.5X monthly revenue, depending on how the file looks — that is a ceiling, not a promise. The better first question is what the stretch between signing and the first draw actually costs you.

What decides how much a contractor can get?

Five things, read together. No single one sets the number, and the contract value is not one of them.

  • Monthly deposits. Draws, final checks, change orders, and released retainage that landed in the account. The desk reads several months, so a crew that gets paid in lumps is read across those lumps, not on its best month.
  • The balance between draws. A draw lands, then nothing for three or four weeks while payroll keeps going out. Whether the balance holds through that stretch or hits zero and bounces says more than the size of the draw.
  • Existing payments. Equipment notes, a supplier terms account, insurance, and above all any daily or weekly payment already on the account. Every one of them is money the deposits must also carry.
  • Time in business. A longer run of statements shows the desk more than one job cycle and more than one season.
  • Open liens, judgments, or disputes. They are read with everything else rather than on their own, and they are the kind of thing to tell the desk before it finds them.

That is why two contractors with the same revenue can land in very different places. One bills on time, holds a balance between draws, and carries one equipment note. The other has the same revenue, waits on a slow-paying owner, and already has a daily advance on the account. The first file usually supports more.

Size the gap before you ask for a number

Most contractors do not need the biggest number a desk will consider. They need enough to carry materials and payroll from the day the job starts to the day the first draw clears, plus a cushion for the retainage that sits until the punch list is closed.

The pressure is wide. The Federal Reserve Banks’ 2026 Report on Employer Firms, from the 2025 Small Business Credit Survey, found that 60% of employer firms applied for financing in the prior 12 months, and that the most common reason was to meet operating expenses, at 56%, ahead of expansion at 46%. Of those applicants, 42% received the full amount they sought, 36% received some or most, and 22% received none. The backdrop is not helping: the Census Bureau estimated construction spending in September 2026 at a seasonally adjusted annual rate of $2,186.1 billion, 2.7 percent below September 2025, with spending over the first nine months of the year 2.9 percent below the same period a year earlier.

Here is a simple way to size the gap. The numbers below are made up to show the math — they are not Aglet’s terms and not an offer.

Illustrative jobFigure
Contract value$240,000
Materials and deposits due before work starts$45,000
Payroll and subs per week$14,000
Weeks until the first draw actually clears6
Cash out before the first dollar inAbout $129,000
First draw after a 10 percent holdback$54,000
Still carried after the first drawAbout $75,000

In this made-up example, the real need is what is still carried after the first draw, less the cash already in the account, plus any one-time item, such as the compressor that quits in week three. What is left is a number you can defend, and it is usually well under the ceiling. It is also a number the desk can read against your deposits, which is the only comparison that matters.

Why the draw calendar sets the timing

Because construction pays after the work, on a schedule the contract and the statute set, not when the payroll is due. Florida’s Construction Contract Prompt Payment Law, Florida Statutes §715.12, says payment is owed once you are entitled to it under the contract, have sent a written request for payment, the party above you has itself been paid, and the required lien waivers are in. An incomplete request can be sent back within 14 days, and the clock restarts when it is corrected. If payment is late, it bears interest at the statutory rate plus an additional 12 percent per annum, computed from the 14th day after it was due. The retained balance is due within 14 days after substantial completion is certified or the owner takes possession.

Retainage is the piece owners most often underestimate. On Florida public work, §255.078 lets a public entity withhold up to 5 percent of each progress payment as retainage. On private jobs the contract sets the rate, and it can run higher. Either way, a slice of every draw sits outside your account until the end of the job, and the desk cannot read money that has not landed. If a job is heavy on retainage, tell the desk when you apply; it explains a thin month better than the statement can.

Factoring, a term program, or a line: which sizes better?

They size and repay differently, so the right one depends on where the money is stuck.

Invoice factoring

Invoice factoring sizes to the invoice. If the cash you are waiting on is a billed invoice to a general contractor, a property manager, or a commercial owner on 30–90 day terms, factoring advances a share of it now and pays out the rest, less the fee, when the customer pays. It does not fit invoices to individual homeowners, and it does not fit the weeks before anything has been billed. The guide on how invoice factoring works walks through the advance, the reserve, and the fee.

A working-capital or term program

A working-capital or term program is sized off the whole file and fits the stretch factoring cannot reach: materials and deposits before the job starts, payroll before the first draw, or a one-time buy like a trailer or a lift. It is repaid on a schedule spelled out before you sign, and the payment has to survive the weeks between draws, not just the week a draw lands. Terms run out to 48 months at the ceiling — most files land 12–24.

A business line of credit

A line fits the gaps that come back on every job, between the material order and the draw. Limits typically scale with monthly revenue, and cost is tied to what you draw. Drawn at mobilization and repaid when the draw clears, it works as a buffer rather than a lump sum.

Revenue-based financing, repaid as a share of what the business brings in, can fit a crew whose work swings with the season or the storm calendar. It is lighter in a slow month and heavier in a busy one, with the share set up front.

What shrinks the number?

The same few patterns pull an amount down, and most of them are visible in the statements.

  • A balance that lives at or near zero between draws.
  • Returned payments or overdrafts in recent months.
  • More daily or weekly debits than the deposits explain, especially a second or third advance.
  • Deposits that stopped for a reason the job calendar does not explain.
  • An open lien, judgment, or dispute the desk learns about from the search instead of from you.

Cost matters as much as size. In the Federal Reserve Banks’ 2026 report, 60% of firms that borrowed from online lenders said actual borrowing costs were higher than they expected. Get the total to repay and the payment schedule in writing before you sign, and compare the payment to the weeks between draws, not to the week the draw lands. A smaller ask that the account can carry usually does better than a bigger one it cannot. The guide on what underwriters look for in bank statements covers what helps and what you cannot fix in a week.

These figures are illustrative ranges, not a quote. Nothing on this page is an offer, a commitment to fund, or an approval. The review desk’s read of the actual file is the answer.

Where Aglet fits

Aglet Funding offers working-capital and term programs, revenue-based financing, invoice factoring, and a business line of credit. Working-capital, term, and revenue-based programs typically range up to 2.5X monthly revenue, depending on how the file looks; on the working-capital and term programs, terms run out to 48 months at the ceiling — most files land 12–24. Line-of-credit limits typically scale with monthly revenue. We’re not the cheapest desk. Files that fit usually leave with a longer term and one payment instead of three — and you’ll know exactly what it costs before you sign anything. If a bank can fund the file in time, take it. A supplier’s terms account or an equipment lender that takes the excavator as collateral can also be the cheaper tool.

Our working capital for contractors page covers how a contractor’s file is read, draws and retainage included. You can see what a business like yours can typically reach in as little as three minutes, no documents, or start the funding application when you are ready to send statements. Sensitive steps happen only on the secure application or by phone, never by text or email.

Sources

  1. Federal Reserve Banks, 2026 Report on Employer Firms: Findings from the 2025 Small Business Credit Survey (March 3, 2026) — 60% of firms applied for financing in the prior 12 months; the most common reasons were operating expenses (56%) and expansion (46%); 42% of applicants received the full amount sought, 36% some or most, 22% none; 60% of firms that borrowed from online lenders said actual borrowing costs were higher than expected
  2. Florida Statutes §715.12 (2025), Construction Contract Prompt Payment Law — payment is owed once the obligee is entitled to it under the contract, has sent a written request, the obligor has itself been paid, and lien waivers are furnished; an incomplete request may be returned within 14 days; late payments bear interest at the s. 55.03 rate plus 12 percent per annum from the 14th day after payment is due; the retained balance is due within 14 days after substantial completion is certified
  3. Florida Statutes §255.078 (2025), Public construction retainage — a public entity may withhold from each progress payment an amount not exceeding 5 percent of the payment as retainage
  4. U.S. Census Bureau, Monthly Construction Spending, September 2026 (released November 2, 2026) — construction spending in September 2026 was estimated at a seasonally adjusted annual rate of $2,186.1 billion, 2.7 percent below September 2025; spending in the first nine months of 2026 was 2.9 percent below the same period in 2025

Questions

Asked plainly

At Aglet Funding, working-capital, term, and revenue-based programs typically range up to 2.5X monthly revenue, depending on how the file looks. That is a ceiling, not a typical outcome. The review desk weighs the deposits that actually reached the account over several months, how the balance holds between draws, the payments already coming out, and time in business. Nothing here is an offer or an approval; the read of the actual file is the answer.

Not until it lands. Underwriters read deposits that reached the account, so money an owner is still holding is not in the file yet. On Florida private jobs the prompt-payment law puts the retained balance due within 14 days after substantial completion is certified, and on public work a public entity may hold back up to 5 percent of each progress payment. If retainage is a large share of a job, say so; it helps the desk read a thin month for what it is.

Sometimes. Invoice factoring is for invoices to business customers for completed work on 30 to 90 day terms, such as a general contractor, a property manager, or a commercial owner. It sizes to the invoice, not to the whole file, and it does not fit invoices to individual homeowners or work that has not been billed yet. For residential work or for the stretch before the first draw, a working-capital or term program is usually the tool.

Usually, yes. An equipment note, a supplier account, or an advance already on the account is money the deposits must carry before anything new. The desk reads it as part of the file rather than as a bar on its own. What matters is whether the lumps of draw income add up to steady deposits that can carry what is already coming out plus the new payment through the weeks between draws.

See all questions

Check Your Options

See what your file supports.

As little as three minutes, no documents, and a plain answer — if it doesn’t fit, we say so.

Check your options

As little as three minutes · No documents · No obligation