Guide

Revenue-based financing vs. a business line of credit: which fits?

An advance is usually a purchase of future sales repaid daily or weekly. A line of credit is revolving: you draw what you need and pay for what you use.

Revenue-based financing and a business line of credit solve the same problem — a cash-flow gap — in different ways. Revenue-based financing is usually a purchase of future sales: you get a lump sum and repay a fixed total, often daily or weekly, from card receipts or bank debits. A line of credit is revolving. You draw what you need up to a limit, typically pay for what you have drawn, and as you repay, the availability usually comes back.

What actually differs?

The structure. One is a lump-sum purchase of future receipts. The other is a reusable credit limit.

NerdWallet’s explainer (updated May 21, 2026) describes the classic version as “an advance of cash you typically repay using a percentage of future credit card sales.” In the form most small businesses meet, it is not a loan: the funder buys a slice of future sales at a discount and you remit a fixed dollar total. Some offers are written as short-term loans instead, so the contract, not the headline, tells you which one you hold.

A business line of credit works more like a pool you can reuse. NerdWallet’s comparison of business loans and lines of credit (updated August 6, 2026) describes a line as “a pool of money that you can keep dipping into, up to a limit,” and as revolving credit: you carry a balance that accrues interest, pay it back as you are able, then borrow again. Investopedia makes the same point about flexibility: borrowers can use only what they need and pay interest only on that amount.

That difference shows up in how common each product is. The Federal Reserve Banks’ 2025 Report on Employer Firms, from the 2024 Small Business Credit Survey, found that 34% of employer firms regularly use a line of credit, and that 37% of firms had applied for financing in the prior 12 months. A line is the more familiar tool. Revenue-based financing is the one owners usually meet when they need money faster than a bank line can move.

How each one is repaid

An advance is collected as sales arrive, or as a fixed debit; a line is repaid against what you have actually drawn.

Revenue-based financing

The classic version is a card split. Your processor holds back a set percentage of each day’s card sales — NerdWallet puts that “holdback rate” or “retrieval rate” at typically 5% to 20% — and sends it to the funder until the agreed total is met. The newer version skips the processor and pulls a fixed amount from the business bank account by ACH, daily or weekly. NerdWallet says many advances are repaid within three to 18 months, and that stronger sales usually mean a faster payoff. With a card split, a slow week remits less and the advance takes longer to clear. With a fixed debit, the amount usually stays the same unless the contract has a true-up, so ask before you sign.

The business line of credit

You draw only what you need, up to the limit. Interest or fees typically apply to the drawn balance, not to the unused capacity. You repay on the schedule in the agreement, often weekly or monthly, and as the balance comes down the available amount typically replenishes. Limits typically scale with monthly revenue, and revolving convenience typically prices above a fixed bank line. It is not a facility “for life”: the funder can reduce or close a line if the file weakens, so read the renewal and default clauses.

 Revenue-based financingBusiness line of credit
What you receiveA lump sum, usually a purchase of future salesA reusable limit; you draw as needed
How you repayA fixed total, often daily or weekly from card sales or bank debitsPayments on what you have drawn; availability typically replenishes as you repay
How it is pricedUsually a factor rate, a decimal times the advance, plus any fees outside that numberTypically interest or fees on the drawn balance, sometimes with annual, draw, or inactivity fees
If sales dropA card split usually remits less and takes longer; a fixed debit often stays the sameYou can often draw less; interest is typically owed only on what is outstanding
When it tends to fitA short, defined need when a bank line will not move in timeRecurring or uneven needs, if the file supports a revolving limit

How each one is priced

An advance is usually priced with a factor rate, which sets a fixed dollar total. A line of credit is usually priced as interest or fees on what you draw.

A factor rate is a decimal, not an annual percentage. LendingTree explains the math as advance amount times the factor rate equals the total you pay back, and says factor rates, sometimes called buy rates, typically range between 1.1 and 1.5. NerdWallet puts the same typical range at 1.1 to 1.5. The numbers below are made up to show the math — they are not Aglet’s pricing and not an offer. On a $10,000 advance at a 1.25 factor, LendingTree’s walkthrough produces a $12,500 total, a $2,500 cost, whether you remit it in four months or in fourteen. Repaying faster does not shrink the dollar cost; it only raises the equivalent annual rate. NerdWallet estimates effective APRs on factor-rate advances at 40% to 350% for that reason. The useful comparison is still the total dollars, not the APR headline.

Ask what sits outside the factor. Origination, ACH, or servicing fees can change the net you actually receive while the remittance is still calculated on the headline advance. The guide to factor rates vs. interest rates walks through that conversion in more detail, and the revenue-based financing calculator shows the payback, the cost and the payment for your own offer.

A line of credit typically charges interest only on the drawn amount, as Investopedia describes, so unused capacity is usually cheaper than taking a lump sum you do not need yet. Lines can still carry annual, draw, or inactivity fees, and some alternative lines are themselves priced with a factor on each draw, so read the fee schedule. Compare two offers the same way: net funds received, total dollars to be repaid, payment timing, and what happens if you prepay or if sales dip.

When does each one tend to fit?

A line of credit tends to fit recurring or uneven needs. An advance tends to fit a short, defined gap when a line will not be in place in time. Neither is automatically the better tool.

If you restock every few weeks, cover payroll between slow and busy stretches, or want a cushion you may not use, a revolving line usually wastes less money than a lump sum you start remitting immediately. If a single job, a tax bill, or a repair is due now and a bank line would take too long, an advance can close the gap — at a higher cost, with daily or weekly remittances that have to fit the account. If a bank can fund the file in time, take the bank. If the cash is sitting in unpaid business-to-business invoices, that is usually a factoring question, not a line or an advance.

Revenue-based financing comes in more than one shape. Most versions are a purchase of future receivables. The difference is the remittance: some pull a fixed daily or weekly amount, while others take a set share of revenue over a longer horizon, heavier in strong months and lighter in slow ones. Whatever label is on the offer you were handed, read how the payment moves before you compare it with a line.

These figures are illustrative ranges, not a quote. Nothing on this page is an offer, a commitment to fund, or an approval. The review desk’s read of the actual file is the answer.

Where Aglet fits

We offer a business line of credit and revenue-based financing, which remits as a share of revenue. Working-capital, term, and revenue-based programs typically range up to 2.5X monthly revenue, depending on how the file looks; on the working-capital and term programs, terms run out to 48 months at the ceiling — most files land 12–24. Line-of-credit limits typically scale with monthly revenue. Funding can come as soon as the same day on a complete file. We’re not the cheapest desk. Files that fit usually leave with a longer term and one payment instead of three — and you’ll know exactly what it costs before you sign anything. If a bank can fund the file in time, take it.

The review desk looks at time in business, monthly revenue, and the overall health of the file. You can see what a business like yours can typically reach in as little as three minutes, no documents, or start the funding application when you are ready to send statements. Sensitive steps happen only on the secure application or by phone, never by text or email.

Sources

  1. Federal Reserve Banks, 2025 Report on Employer Firms: Findings from the 2024 Small Business Credit Survey — Among employer firms, 34% regularly use a line of credit; 37% applied for financing in the prior 12 months
  2. NerdWallet, explainer on factor-rate advances (updated May 21, 2026) — Definition as an advance repaid from a percentage of future credit card sales; factor rates typically 1.1 to 1.5; holdback typically 5% to 20%; effective APRs it estimates at 40% to 350%; many advances repaid within three to 18 months, daily or weekly
  3. NerdWallet, Business Loan vs. Line of Credit: Which Is Right for You? (updated August 6, 2026) — A line of credit is a pool of money you can keep drawing from, up to a limit; revolving credit that accrues interest on the balance, paid back as you are able, then drawn again
  4. Investopedia, Understanding Lines of Credit (LOC): Definition, Types & Examples — Borrowers can use only what they need and pay interest only on that amount, and can adjust repayments based on their budget
  5. LendingTree, What Is a Factor Rate and How Do You Calculate It? — Factor rates typically range between 1.1 and 1.5; total payback is advance amount times the factor rate, illustrated with $10,000 at 1.25 equaling $12,500

Questions

Asked plainly

No. Revenue-based financing is usually a purchase of future sales: you receive a lump sum and repay a fixed total from card sales or bank debits, often daily or weekly. A business line of credit is revolving. You draw what you need up to a limit, typically pay for what you have drawn, and as you repay, the availability usually replenishes. Compare the contract, not the marketing label.

There is no single cheaper product. NerdWallet notes that factor-rate advances can be expensive, with effective APRs it estimates at 40% to 350%, because a factor-rate cost is fixed even when you repay quickly. A line of credit typically charges interest or fees on what you draw, so unused capacity usually costs less than a lump-sum advance. The only fair comparison is total dollars out the door, including fees, against how the payments fit your cash flow.

Sometimes, depending on how the file looks and on what the contracts already allow. A new daily or weekly debit on top of an existing line payment can tighten cash in a slow week. The review desk looks at monthly revenue, deposit consistency, existing payments, and time in business before saying whether another facility fits. If the stacked payments would strain the account, that is usually a reason to wait or to refinance into one clearer structure, not to add a second one.

The classic version of revenue-based financing is repaid from card sales, but many programs today pull a fixed amount from the business bank account instead. A business line of credit is read off the health of the file, not off card volume alone. In both cases the review desk weighs monthly revenue, how steady the deposits are, time in business, and what other payments already come out.

See all questions

Check Your Options

See what your file supports.

As little as three minutes, no documents, and a plain answer — if it doesn’t fit, we say so.

Check your options

As little as three minutes · No documents · No obligation