It depends on how the remittance is set up. If your advance takes a true percentage of sales, the payment falls with your sales on its own. If it pulls a fixed daily or weekly debit, the amount stays the same unless the reconciliation clause in your contract is used to true it up against what the business actually brought in.
Is your payment a true percentage or a fixed debit?
Your bank statement answers this: a payment that changes with each day’s sales is a percentage remittance, and one that is the same dollar amount every time is a fixed debit. A Federal Trade Commission business guidance post from 2020 describes the original design in one line: daily payments may rise or fall based on daily sales. That is how a split of card receipts works. The processor sends the funder its share of each batch, so a slow week sends less without anyone asking.
Many advances work differently. Law professor Kara Bruce, writing in a Thomson Reuters legal newsletter in 2022, describes the common setup: the daily payment is first set as a specified percentage of the merchant’s average daily receipts, and that dollar amount is then fixed at the outset. New York’s commercial financing disclosure regulation gives sample wording for the same thing, a preset daily payment based on the provider’s estimate of a stated percentage of the business’s income. A fixed debit is a forecast of your sales made on the day you signed. The guide to daily and weekly payments covers how each one shows up on a statement.
The numbers below are made up to show the math — they are not Aglet’s pricing and not an offer. Say the contract percentage is 10% and the funder estimated $40,000 a month in sales. The debits add up to about $4,000 a month. If sales fall to $25,000, the same $4,000 is now 16% of what came in, and 10% would have been $2,500. That $1,500 gap is what a reconciliation is about.
| Percentage remittance | Fixed debit | |
|---|---|---|
| What changes when sales fall | The dollar amount falls with sales, and it takes longer to finish | Nothing on its own; the same amount leaves and becomes a larger share of what came in |
| What you have to do | Nothing to lower it; keep reading the statements | Ask for a reconciliation under the contract and send proof of revenue |
| What to check in the contract | The percentage, which sales it applies to, and any minimum payment | The percentage, the revenue estimate behind the debit, and the reconciliation clause and its steps |
| What stays the same | The total you agreed to repay | The total you agreed to repay |
What is a reconciliation clause, and how does a request work?
A reconciliation clause, also called a true-up, is the part of a fixed-debit contract that lets the payment be adjusted to match the agreed percentage of actual revenue. New York’s regulation defines a true-up mechanism in two parts: the funder receives payments based on a preset amount, and the contract allows the business to request, or the funder to initiate, adjustments, credits, or charges after signing, so that the total paid more closely reflects the percentage in the contract. Note the word “charges.” A true-up can run in either direction, so a strong stretch can raise the payment the same way a weak one lowers it.
Disclosure rules treat the clause as something you should be able to find. New York requires an offer with a true-up mechanism to explain how the preset payment was calculated, to describe the mechanism, and to point to the part of the contract that holds its terms. California’s rule for sales-based financing asks for the same explanation and reference, plus the date and amount of any true-ups the provider reasonably anticipates.
How a request usually works
The contract sets the steps, and in most contracts the business has to ask. Bruce reprints a sample clause in which the merchant may request an adjustment once each calendar month, and the new amount applies going forward until the next adjustment. New York’s sample language frames it as a right to refunds if you demonstrate that your payments exceeded the stated share of total income in a given month. Both versions turn on proof: the bank statements for the months in question and, if you take cards, the processor statements.
The request goes to whoever the contract names, usually the funder or its servicing company, at the address in the notices section. It is a right the contract describes, not a favor, but read how yours is written: Bruce notes that some clauses leave the adjustment to the funder’s discretion. One thing does not move. As her article puts it, whether or not the daily payment is adjusted to reflect actual receipts, the funder is entitled to the specified total amount. A lower payment stretches the time; it does not shrink what you agreed to deliver.
What should you read in your own contract?
Read the percentage, how the fixed payment was calculated, the reconciliation clause itself, and the notices section. If the headings don’t help, search for “reconciliation,” “true-up,” and “adjustment.”
- The percentage. The share of revenue the funder purchased. Every true-up is measured against it.
- The estimate. The monthly revenue figure the fixed debit was built on. If your sales are now well under it, that is the gap to document.
- Who can start a reconciliation, and how often. You, the funder, or both; once a month or on another schedule.
- What you must send, and by when. Which statements, for which accounts, and any deadline after the month closes.
- What the adjustment does. A lower debit going forward, a credit or refund for a month already paid, or both.
- What a returned debit costs. Fees, and anything else the contract says follows a debit the bank sends back.
This guide is general education, not legal advice. What a particular clause means for your business is a question for your own attorney.
What should you do first when sales fall?
Call the funder early, before a debit comes back unpaid. You will not be the first owner to make that call: the Federal Reserve Banks’ 2026 Report on Employer Firms found that firms were slightly more likely to report that revenues decreased than increased in the prior 12 months. Then work in this order.
- Run your own numbers. Total the month’s deposits, total the debits to the funder, and divide. That is the share the advance actually took. Compare it with the contract percentage. The revenue-based financing calculator shows the total payback and the payment on the offer you signed.
- Call, and say what changed. Give the plain facts: what sales were, what they are now, and why. Ask how a reconciliation request is filed.
- Send recent statements. The bank statements for the months in question, plus processor statements if you take cards, sent the way the contract or the funder directs.
- Ask in writing. Put the request in an email or letter that names the clause, the month, and your numbers. The call is a start; the written request is the record.
- Keep records. Save what you sent, when you sent it, and every reply.
- Keep the payments going. A request does not pause the debit. Until the funder confirms a new amount in writing, the agreed payment still applies.
The written step matters. In its 2020 post, the FTC listed among the concerns raised about advances that when daily sales drop, some providers may not conduct promised true-ups or reconciliations to reduce merchants’ payments. A dated request with statements attached shows what you asked for and when.
Should you take a second advance to cover the payments?
Usually not, because a second advance adds a second payment to the same reduced revenue. The new money eases this month. After that, two remittances come out of sales that could not comfortably carry one, and the cost of the second advance is added to what you already agreed to repay. Cash gets tighter, not looser. Check your contract as well; some agreements limit additional financing while the advance is open.
The honest tradeoff runs both ways. More capital can make sense when the drop is temporary and you can name what ends it, such as a signed job that starts next month or a season that turns on a known date. If the only plan for the second payment is that sales come back, work the reconciliation first. It leaves the total where it was. A second advance adds to it.
Where Aglet fits
Our revenue-based financing is repaid as a share of what the business actually brings in, heavier in strong months and lighter in slow ones, with the percentage set up front. Before you sign you’ll see the percentage, the total to repay, and how remittance works, in plain terms. The review desk looks at your real numbers, and what a file supports depends on how the file looks. Nothing on this page is an offer, and it describes how our own program is built; a question about an advance you already have belongs with the funder that holds it.
We’re not the cheapest desk. The total repaid on revenue-based financing can run higher than a fixed-term bank product, and you’ll know exactly what it costs before you sign anything. If a bank can fund your file in time, take it. If you want to see what your file supports, the Quick Assessment asks for no documents.
Sources
- New York State Department of Financial Services, 23 NYCRR Part 600 (Commercial Finance Disclosure Law regulation) — section 600.1 defines a true-up mechanism for sales-based financing as payments based on a pre-set amount where the contract allows the recipient to request, or the financer to initiate, adjustments, credits, or charges so the total paid more closely reflects the split rate; section 600.6 requires an offer with a true-up mechanism to explain how the preset payment was calculated, describe the mechanism, and reference the part of the contract with its terms, with sample language about a right to refunds if the recipient demonstrates payments exceeded the stated share of income in a given month
- California Code of Regulations, Title 10, Section 914, Sales-Based Financing Disclosure Formatting and Contents (Cornell Legal Information Institute) — the sales-based financing disclosure must list the date and amount of any reasonably anticipated true-ups and, if the contract contains a true-up mechanism, a short explanation of how the pre-set periodic payment was calculated and of the mechanism, with a reference to the part of the contract that describes it
- Federal Trade Commission, Small business financing: Staff Perspective outlines issues (February 26, 2020) — daily payments may rise or fall based on daily sales; among the concerns raised, when daily sales drop some providers may not conduct promised true-ups or reconciliations to reduce merchants’ payments
- Kara J. Bruce, Bankruptcy Law Letter, April 2022 (Thomson Reuters; hosted by UNC School of Law) — the daily payment is initially set as a specified percentage of the merchant’s average daily receipts and fixed at the outset; many agreements carry a true-up or reconciliation provision; a reprinted sample clause lets the merchant request an adjustment once each calendar month, applied going forward; some clauses leave adjustment to the financier’s discretion; whether or not the daily payment is adjusted, the financier is entitled to a specified total amount
- Federal Reserve Banks, 2026 Report on Employer Firms: Findings from the 2025 Small Business Credit Survey (March 3, 2026) — firms continued to be slightly more likely to report that revenues decreased rather than increased in the prior 12 months